Cryogenic FAT test of a Neles valve at valve technology center

Did you know we do cryogenic factory acceptance testing (FAT) for our valves in -196°C? The tested valve sizes range from 4'' up to 100''. Sometimes the tests are done together with a third party inspector representing our customer. Watch the video and step into our cryogenic lab!

Becht Across Disciplines

Becht provides technically excellent engineering solutions, plant services, and software tools to our worldwide clients. We are the company a client will go to when they need the job done right. We are a growing and profitable company, responsive to client needs, committed to excellence ...

FTIR In Fuel Analysis - How does it work?

FTIR fuel quality testing requires a fast and highly precise analysis of gasoline, diesel and jet fuels directly in the field. Learn about test methods too.

Interview with Richard Charlesworth, Executive Director, S&P Global Commodity Insights

The downstream sector is navigating through unprecedented challenges amid rapidly evolving dynamics. Questions abound regarding the expectations for oil in 2024 and beyond, the reality check on the refining and petrochemicals markets, and the impacts of decarbonisation and green initiatives ...

Topsoe's graded bed technology

Topsoe’s graded bed technology creates significant performance improvements, can in some cases extend the operating cycles from a few months to several years. Fouling of the catalyst bed reduces the void volume causing increased pressure drop, channelling and hot spots. The pressure ...

Accuracy, Reliability, and Innovation

Serving markets such as refineries, petrochemical, power, natural gas, environmental monitoring, and more, AMETEK Process Instruments is committed to designing innovative, reliable analyzers that help our customer achieve higher levels of productivity and quality.

OptiCPP: Cloud & Pour Point

Combining a revolutionary patented built-in cooling system and highly precise detection mechanism, ISL's OptiCPP performs pour and/cloud point testing of any petroleum products, down to -95°C (-139°F), in accordance with all international standards.

Significant air saving possibilities

Sustainability is a hot topic in all process industries. The thousands of valves that control and safeguard today’s process plant operations consume a sizeable amount of compressed air. Valmet’s Neles™ NDX intelligent valve controller consumes approximately 80 to 90% less air than ...

SERVOMEX clean air solutions

Our gas analyzers for clean air applications will optimize process control and safety and help you to meet environmental standards — keeping your plant and processes future-proofed.

Sari Saxholm explains why a valve is not just a valve

”Reliable valves ensure safe and reliable processes”, says Sari Saxholm, Valmet's Product Manager for butterfly valves. Watch the video and learn why a valve is not just a valve.

How to fix a tube in a fired heater furnace without SD - Hot Tube Stabilization

Occasionally, tube supports (wall and roof) in the radiant section of process heaters fail, allowing the process tubes to potentially get out of alignment (sagging or bowing) or even worse, rupturing. IGS Hot-tek provides on-line repair service to stabilize the process tubes while the ...

David Anderson's introduction to shutdowns

In the video, David Anderson, Head of Service Project Support and Promotion at Valmet's Flow Control business line, talks about the basics of shutdown. What is a shutdown? And what are the main stages of a shutdown process? Watch the video to find out!

Fluid Catalytic Cracking - improve productivity and plan maintenance efficiently

Tracerco can help you understand catalyst and process flow behaviour inside your Fluid Catalytic Cracking (FCC) unit, so you can improve productivity, identify problems and plan maintenance efficiently. Using a Tru-Scan™, we can measure the height of the catalyst level in the ...